|
DIGGING EDGE
|
| LEVIN Drill Point has a unique curved edge at
the corner of the drill point. This ensures that
the drilling process becomes self-digging making
drill penetration effortless. |
The conventional drill point only facilitates
drilling. A knife like corner is created to scrape
the steel off. Sufficient pressure has to be applied
for more effective drilling making drilling tiring. |
|
|
|
|
|
|
IMPROVED DRILL SPEED
|
| LEVIN Drill Point has been put through a series
of tests and results show that with LEVIN Drill
Point, there is a drill speed improvement of upto
30%! Average timing rated well below 4.5 seconds. |
Conventional drill points are rated with an average
drill speed of approximately 5 seconds on a 5mm
thick steel plate. Timing varies dependent on production
quality. |
|
AUTOMATIC CENTRALISING
|
| LEVIN Drill Points are also designed with a unique
"Z" profile at the tip of the drill point.
This keeps the fastener at the spot were the drilling
is taking place, solving your problem of drill slippage. |
Conventional drill points has a straight line
at the tip. There is no grip with such kind of drill
point design and hence slippage during drilling
is a common problem. |
|
|
|
| Why settle for this kind of drill effectiveness, |
when you can get this kind of drill effectiveness |
.gif){kind=small}
Downloads
Contact Us
Comparision 
.gif){kind=small}
Associates
Benefits
Fact Sheet
.gif){kind=small}
Trouble Shooting 
Terminology 
How To Order 
Corrosion 
Warranty Certification